ZyXEL Communications GS3700 Series Guide de l'utilisateur télécharger pdf (Page 307)

100

101

Chapter 37 DHCP

GS3700/XGS3700 Series User’s Guide

307

Note: You must set up a management IP address for each VLAN that you want to

configure DHCP settings for on the Switch. See Section 6.5 on page 62 for

information on how to do this.

Figure 195 IP Application > DHCP > DHCPv4 > VLAN

The following table describes the labels in this screen.

Table 157 IP Application > DHCP > DHCPv4 > VLAN

LABEL DESCRIPTION

VID Enter the ID number of the VLAN to which these DHCP settings apply.

DHCP Status Select whether the Switch should function as a DHCP Server or Relay for the specified

VID. If you select Server then fields related to DHCP relay configuration are grayed out

and vice versa.

Server Use this section if you want to configure the Switch to function as a DHCP server for this

VLAN.

Client IP Pool

Starting

Address

Specify the first of the contiguous addresses in the IP address pool.

Size of Client

IP Pool

Specify the size, or count of the IP address pool. The Switch can issue from 1 to 253 IP

addresses to DHCP clients.

IP Subnet

Mask

Enter the subnet mask for the client IP pool.

Default

Gateway

Enter the IP address of the default gateway device.

1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 415 416

Commentaires sur ces manuels

Pas de commentaire

ZyXEL Communications GS3700 Series Guide de l'utilisateur Page 307

Commentaires sur ces manuels