ZyXEL Communications MES-2110 Guide de l'utilisateur télécharger pdf (Page 69)

Chapter 9 802.1x

MES-2110 User’s Guide

Click Configuration > 802.1x > Port Configuration in the navigation panel to

display the screen as shown.

Figure 33 Configuration > Port Configuration

The following table describes the labels in this screen.

Table 16 Configuration > Port Configuration

LABEL DESCRIPTION

Port This field displays the port number.

Active Select this check box to permit 802.1x authentication on the Switch.

Note: You must first enable 802.1x authentication on the Switch

before configuring it on each port.

Guest VLAN You can configure this if you have enabled the guest VLAN feature in the

Configuration > Global Configuration screen (see Section 9.2 on

page 67

Select Enable then enter the number that identifies the Guest VLAN.

Make sure this is the Guest VLAN recognized in your network.

Clients belonging to the guest VLAN can access unprotected areas in your

network, such as the Internet.

Select Disable if you do not want to use this feature.

Reauthenticat

ion

Specify if a subscriber has to periodically re-enter his or her username

and password to stay connected to the port.

Reauth-Period

(1-999999)

Specify how often (in minutes) a client has to re-enter his or her

username and password to stay connected to the port.

Default is 3600 minutes (or 1 hour).

Undo Click this to restore your last saved settings.

Apply

Click this to save your changes.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 183 184

Pas de commentaire

ZyXEL Communications MES-2110 Guide de l'utilisateur Page 69