ZyXEL Communications MES-2110 Guide de l'utilisateur télécharger pdf (Page 27)

Chapter 2 Hardware Installation and Connection

MES-2110 User’s Guide

2.3.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment

it contains.

• Make sure the position of the Switch does not make the rack unstable or top-

heavy. Take all necessary precautions to anchor the rack securely before

installing the unit.

2.3.2 Attaching the Mounting Brackets to the Switch

1 Position a mounting bracket on one side of the Switch, lining up the four screw

holes on the bracket with the screw holes on the side of the Switch.

Figure 7 Attaching the Mounting Brackets

2 Using a #2 Philips screwdriver, install the M3 flat head screws through the

mounting bracket holes into the Switch.

3 Repeat steps 1 and 2 to install the second mounting bracket on the other side of

the Switch.

4 You may now mount the Switch on a rack. Proceed to the next section.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 183 184

Pas de commentaire

ZyXEL Communications MES-2110 Guide de l'utilisateur Page 27