ZyXEL Communications MES-2110 Guide de l'utilisateur télécharger pdf (Page 25)

MES-2110 User’s Guide

CHAPTER 2

Hardware Installation and

Connection

2.1 Installation Scenarios

This chapter shows you how to install and connect the Switch.

The Switch can be placed on a desktop or rack-mounted on a standard EIA rack.

Use the rubber feet in a desktop installation and the brackets in a rack-mounted

installation.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front

and 3.4 inches (8 cm) at the back of the Switch. This is especially important for

enclosed rack installations.

2.2 Desktop Installation Procedure

1 Make sure the Switch is clean and dry.

2 Set the Switch on a smooth, level surface strong enough to support the weight of

the Switch and the connected cables. Make sure there is a power outlet nearby.

3 Make sure there is enough clearance around the Switch to allow air circulation and

the attachment of cables and the power cord.

4 Remove the adhesive backing from the rubber feet.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 183 184

Pas de commentaire

ZyXEL Communications MES-2110 Guide de l'utilisateur Page 25