ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series Guide de l'utilisateur Page 368

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 519
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 367
Prestige 2602HW Series User’s Guide
368 Chapter 37 Firmware and Configuration File Maintenance
Figure 220 FTP Session Example
37.2.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
37.2.5 TFTP and FTP over WAN Management Limitations
TFTP, FTP and Telnet over WAN will not work when:
You have disabled Telnet service in menu 24.11.
You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet
service.
The IP address in the Secured Client IP field in menu 24.11 does not match the client IP.
If it does not match, the Prestige will disconnect the Telnet session immediately.
You have an SMT console session running.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
Table 125 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your ISP
or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).
Vue de la page 367
1 2 ... 363 364 365 366 367 368 369 370 371 372 373 ... 518 519

Commentaires sur ces manuels

Pas de commentaire