ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series Guide de l'utilisateur télécharger pdf (Page 138)

Prestige 2602HW Series User’s Guide

138 Chapter 10 Voice Screens

10.3 Advanced Voice Settings Configuration

Click Voice in the navigation panel and then SIP Settings to open the SIP Settings screen.

Select a SIP account and then click Settings to display the following screen.

Table 33 SIP Settings

LABEL DESCRIPTION

SIP Account You can configure the Prestige to use multiple SIP accounts. Select one to configure

its settings on the Prestige.

Active SIP Select this check box to have the Prestige use this SIP account. Clear the check box

to have the Prestige not use this SIP account.

SIP Number Enter your SIP number in this field (use the number or text that comes before the @

symbol in a full SIP URI). You can use up to 95 ASCII characters.

SIP Local Port Use this field to configure the Prestige’s listening port for SIP. Leave this field set to

the default if you were not given a local port number for SIP.

SIP Server

Address

Type the IP address of the SIP server in this field. It doesn’t matter whether the SIP

server is a proxy, redirect or register server.

SIP Server Port Enter the SIP server’s listening port for SIP in this field. Leave this field set to the

default if your VoIP service provider did not give you a server port number for SIP.

Server Address

Enter the SIP register server’s address in this field.

If you were not given a register server address, then enter the address from the

SIP Server Address field again here.

Server Port

Enter the SIP register server’s listening port for SIP in this field.

If you were not given a register server port, then enter the port from the SIP

Server Port field again here.

SIP Service

Domain

Enter the SIP service domain name in this field (the domain name that comes after

the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended set

characters.

User ID This is the user name for registering this SIP account with the SIP register server.

Type the user name exactly as it was given to you. You can use up to 95 ASCII

characters.

Password Type the password associated with the user name above. You can use up to 95

ASCII Extended set characters.

Send Caller ID Select this check box to show identification information when you make VoIP phone

calls. Clear the check box to not show identification information when you make VoIP

phone calls.

Incoming Call

apply to

Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2 ports,

respectively. Select whether you want to receive calls for this SIP account on Phone

1, Phone 2 or both. If you select both, you will not know which SIP account a call is

coming in on.

Advanced

Settings

Click Settings to open a screen where you can configure the Prestige’s advanced

VoIP settings like SIP server settings, the RTP port range and the coding type.

Back Click Back to return to the previous screen.

Apply Click Apply to save your changes back to the Prestige.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 518 519

Commentaires sur ces manuels

Pas de commentaire

ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series Guide de l'utilisateur Page 138

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series