ZyXEL Communications 650 Series Informations techniques télécharger pdf (Page 74)

5) AP Bridge-WDS: Connect the X650 with up to four WDS-capable wireless

routers to expand the scope of your network.

6) Universal Repeater: The X650 can act as Station and AP at the same time. It

can use its Station function to connect to a Root AP and use its AP function to

service all wireless stations within its coverage.

Please select a proper operation mode you want to use from ‘Mode’ dropdown

menu (1), and continue on with other operation mode specific settings:

Access Point - Please go to section 8.1.1

Station-Infrastructure - Please go to section 8.1.2

AP Bridge-Point to Point - Please go to section 8.1.3

AP Bridge-Point to Multi-Point - Please go to section 8.1.4

AP Bridge-WDS - Please go to section 8.1.5

Universal Repeater - Please go to section 8.1.6

8.1.1Setupprocedurefor‘Acce ssPoint’:

Please select the radio band you want to use from the ‘Band’ dropdown menu

(2), and the following message will be displayed:

2.4GHz Access Point Settings

NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to

Multi-Point’ mode, wireless router is operated in wireless bridge

dedicated mode – this means that the X650 is only being used to

expand the scope of network and no wireless clients will be accepted.

If you want to use your wireless router to expand the scope of

network and also accept wireless clients, please select ‘AP

Bridge-WDS’ or ‘Universal Repeater‘ mode.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 151 152

Pas de commentaire

ZyXEL Communications 650 Series Informations techniques Page 74