ZyXEL Communications 650 Series Informations techniques télécharger pdf (Page 109)

107

Here are descriptions of each setup item:

Enable Port Check this box to enable port mapping,

Forwarding (1): and uncheck this box to disable port mapping.

Private IP (2): Input the IP address of the computer on local network

that provides internet service.

Computer Name (3): Pull down the menu and all the computers connected to

the X650 will be listed here. You can easily select the

computer name without checking the IP address of the

computer.

Type (4): Select the type of connection, TCP or UDP. If you are not

sure, please select ‘Both’.

Port Range (5): Input the starting port number in the left field, and input

the ending port number in the right field. If you only want

to redirect a single port number, simply place the port

number in the left field.

Comment (6): Please input any text to describe this mapping, up to 16

alphanumerical characters.

Add (7): Add the mapping to port forwarding table.

Reset (8): Remove all inputted values.

Port Forwarding All existing port forwarding mappings will

Table (9): be displayed here.

Delete (10): Please select a type of port forwarding mapping by

clicking the ‘Select’ box of the mapping, then click

‘Delete Selected’ button to remove the mapping. If there

is no existing mapping, this button will be grayed out.

Delete All (11): Delete all mappings in virtual server table.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 151 152

Pas de commentaire

ZyXEL Communications 650 Series Informations techniques Page 109