ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series Manuel d'utilisateur télécharger pdf (Page 45)

P-660R-F1 Support Notes

You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2 go

through the P-660R-F1 by command in CLI:

lan index [index number]

Usage: index number =1 main LAN

2 IP Alias#1

3 IP Alias#2

lan filter <incoming|outgoing> <tcpip|generic> [set#]



lan save

 IP Alias Setup



(1) Edit the first network in Web Configurator, Advanced Setup, Network -> LAN

-> IP/DHCP Setup by configuring the P-660R-F1's first LAN IP address.

Key Settings:

DHCP

Setup

If the P-660R-F1's DHCP server is enabled, the IP pool for the

clients can be any of the three networks.

TCP/IP

Setup

Enter the first LAN IP address for the P-660R-F1. This will create

the first route in the enif0 interface.

(2) Edit the second and third networks in Network -> LAN -> IP Alias by

configuring the P-660R-F1's second and third LAN IP addresses.

Key Settings:

IP Alias 1

Active it and enter the second LAN IP address for the P-660R-F1.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Pas de commentaire

ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series Manuel d'utilisateur Page 45