ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series Manuel d'utilisateur télécharger pdf (Page 26)

P-660R-F1 Support Notes

Configuration

To make a server visible to the outside world, specify the port number of the

service and the inside address of the server in Web Configurator, Advanced Setup,

Network -> NAT -> Port Forwarding. The outside users can access the local

server using the P-660R-F1's WAN IP address which can be obtained from Web

Configurator, Status -> WAN Information.

For example:

Configuring an internal Web server for outside access (suppose the Server IP

Address is 192.168.1.33):



(2) If add successfully, the Web Configurator will d



same page, the default port for Web Server is 80:



on corresponding rule, then modify and apply it.

Default port numbers for some services

Service

Port Number

FTP

Telnet

SMTP

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

Pas de commentaire

ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series Manuel d'utilisateur Page 26