
VES-1000 Series Ethernet Switch
System Maintenance 1 9-5
Table 9-2 Port Statistics
FIELD DESCRIPTION
Tx65To127 This is the number of frames (including bad frames) transmitted that were between 65
and 127 octets in length.
Tx128To255 This is the number of frames (including bad frames) transmitted that were between 128
and 255 octets in length.
Tx256To511 This is the number of frames (including bad frames) transmitted that were between 256
and 511 octets in length.
Tx512To1023 This is the number of frames (including bad frames) transmitted that were between 512
and 1023 octets in length.
Tx1024ToMAX This is the number of frames (including bad frames) transmitted that were between 1024
and above in length.
RxOctetsMSB Upper 32-bit count of the number of received octets of data (including those in bad
frames).
RxOctetsLSB Lower 32-bit count of the number of received octets of data (including those in bad
frames).
TxOctetsMSB Upper 32-bit count of the number of transmitted octets of data (including those in bad
frames).
TxOctetsLSB Lower 32-bit count of the number of transmitted octets of data (including those in bad
frames).
RxFragments This is the number of frames received that were less than 64 octets long and with either a
CRC error or an alignment error.
RxJabbers This is the number of frames received that were greater than the maximum octets
(specified for the system by the configuration software) long and with either a CRC error
or an alignment error.
RxAlignErrors This is the number of frames received that were of the proper size but with a CRC error
and non-integral number of octets.
RxSymbolErrors This is the number of frames received that were of the proper size but experienced
symbol error during frame reception.
SecurityDrops This is the number of good frames that were dropped because the violation of the switch
security rules.
VLANDrops This is the number of good frames that were dropped because the specified destination
port does not belong to the VLAN domain.
UndersizedPkt This is the number of frames received that were less than 64 octets long and without any
CRC or alignment errors.
OversizedPkt This is the number of frames received that were greater than the maximum octets
(specified for the system by the configuration software) long and without any CRC error or
alignment errors.
TxOversizePkt This is the number of frames transmitted that were greater than the maximum octets
(specified for the system by the configuration software) long and without any CRC or
alignment errors.
VDSL
Upstream/Downstream
status
The following parameters apply to both upstream and downstream VDSL.
Commentaires sur ces manuels