ZyXEL Communications ZYWALL 70 - V4.03 Informations techniques télécharger pdf (Page 31)

Syslog Server for Analysis".

(4) Go to eWC>LOGS>Log Settings page, activate "Syslog" and setup the syslog

server IP as PC_A.

(5) PC_A enables the Kiwi Syslog Daemon.

(6) There is no traffic log sent to kiwi Syslog Daemon anymore.

29. [BUG FIX] SPR ID: 060725664.

Symptom: DNS cannot be updated in bridge mode.

Condition:

(1) Restore default romfile.

(2) Switch device to bridge mode (do not set DNS right now).

(3) Go to eWC>BRIDGE>Bridge, set the DNS server as 172.23.5.1 and save it.

(4) Go to another page and back to this page, you will find the DNS server is 0.0.0.0.

30. [BUG FIX] SPR ID: 060714862

Symptom: IPSec High Availability failed when enable Nailed-Up. The VPN

connection swaps between primary and secondary gateway continuously.

Condition:

/------(W)ZW35(L)----PC2

PC1-----(L)DUT(W)----|

\------(W)ZW70(L)----PC3

(1) Create one VPN tunnel for PC1 and PC2

(2) Redundant Remote Gateway = ZW70

(3) Enable Nailed-Up for DUT, ZW35 and ZW70.

(4) DUT always reconnect tunnel between ZW35 and ZW70.

31. [BUG FIX] SPR ID: 060731994, 060731995

Symptom: Policy route is failed in a special topology.

Condition:

Topology:

ZyWALL 70

PC1(192.168.1.33)-----(SWITCH)-----(192.168.2.33)ZyWALL

35(192.168.10.1)-----PC2(192.168.10.33)

(1) The device under test is ZyWALL 70, the LAN subnet is 192.168.1.x with a LAN

IP alias 192.168.2.x.

(2) In ZyWALL 70, there is a policy route rule that will redirect the range

192.168.10.1-192.168.10.250 to 192.168.2.33.

(3) In ZyWALL 35, disable NAT and firewall feature.

(4) Ping PC1 from PC2, there is no response.

32. [BUG FIX] SPR ID: 060822312, 060822309, 060822310

Symptom: Trigger dial function is abnormal if we blocked all traffic from LAN to

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 81 82

Pas de commentaire

ZyXEL Communications ZYWALL 70 - V4.03 Informations techniques Page 31