ZyXEL Communications P-841 Guide d'installation télécharger pdf (Page 8)





 VDSL Hospitality 100 Rooms or Less Setup Guide

1/05/05 Page 8 of 21

4. Please enter menu 2, and insert the settings for your WAN IP address (the public address

provided by your ISP) and DNS Server information. If you don’t know what settings you use,

contact your ISP for support.

5. After setting these parameters, please continue press the “Enter” until the console shows

“S)ave and return R)eturn without saving M)odify:”. Please type “S” and press “Enter”. Then

the system will request to restart.

Connect the Ethernet cable to WAN or LAN

1. Use a crossover cable (typically a red-colored Ethernet cable) from the WAN port of the VSG-

1200, connected to directly to your computer’s Ethernet port. Alternately, you can connect

your PC using the 4 switch ports on the LAN using a standard Ethernet cable.

2. If connected to the WAN, set the computer’s IP address in the same subnet with VSG-1200

WAN subnet. If connected to the LAN, then obtain DHCP automatically.

3. Open your web browser and input the VSG-1200 WAN side IP address or LAN side IP

address (gateway IP). The login username/password is the same as console.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Pas de commentaire

ZyXEL Communications P-841 Guide d'installation Page 8