ZyXEL Communications P-841 Guide d'installation télécharger pdf (Page 14)





 VDSL Hospitality 100 Rooms or Less Setup Guide

1/05/05 Page 14 of 21

2. You can change the IP address from web interface. Please from main menu to click the

“Administrator >> Network Configuration”, to set the IP address.

3. Please set the IP address to 10.59.1.2, subnet mask to 255.255.255.0, and the gateway to

10.59.1.1.

4. Please click the “Apply” to save the configuration.

5. If you haven’t already done so, set up LAN Device Management in the VSG-1200 for the

ES-2008 switch. Refer to the material above for more information.

6. After you set the mapping table, please try to log into ES-2008 from WAN of VSG-1200 using

the VSG-1200’s WAN address and the Virtual Port assigned to the ES-2008.

VLAN setup

1. From the main menu, go to “Administrator >> Switch Configuration”.

2. In the Protocol Enable Setting section, please choose “Port Based” in the VLAN Operation

Mode drop-down field.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

ZyXEL Communications P-841 Guide d'installation Page 14