ZyXEL Communications omni.net Guide de l'utilisateur Page 57

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 84
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 56
Omni.Net Lite User’s Guide
Chapter 3 Using AT Commands 56
No parity, 8 data bits, 1 stop bit, flow control set to hardware
6 The DTR LED is on. If it is off, check the HyperTerminal settings and your cable
connections.
7 Type in AT and press
[ENTER]. The terminal will response OK as shown below. You can
now use the commands with an “AT” or “at” prefix to configure the TA. Refer to Chapter
5 on page 72 for detailed information on AT command sets.
Vue de la page 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Commentaires sur ces manuels

Pas de commentaire