ZyXEL Communications G-3000 Guide de l'utilisateur télécharger pdf (Page 87)

G-3000H User’s Guide

Chapter 6 Wireless Security Configuration 87

Figure 35 Security: WPA, WPA-MIX, WPA2 or WPA2-MIX

The following table describes the labels not previously discussed

6.12.6 Security: WPA-PSK, WPA2-PSK, WPA2-PSK-MIX

Select WPA-PSK, WPA2-PSK or WPA2-PSK-MIX in the Security Mode field to display

the following screen.

Table 24 Security: WPA, WPA-MIX, WPA2 or WPA2-MIX

LABEL DESCRIPTIONS

Name Type a name to identify this security profile.

Security Mode Choose WPA, WPA-MIX, WPA2 or WPA2-MIX in this field.

ReAuthentication

Timer

Specify how often wireless stations have to resend usernames and passwords in

order to stay connected.

Enter a time interval between 10 and 9999 seconds. The default time interval is

1800 seconds (30 minutes).

Note: If wireless station authentication is done using a RADIUS

server, the reauthentication timer on the RADIUS server has

priority.

Idle Timeout The ZyAIR automatically disconnects a wireless station from the wired network

after a period of inactivity. The wireless station needs to enter the username and

password again before access to the wired network is allowed.

The default time interval is 3600 seconds (or 1 hour).

Group Key Update

Timer

The Group Key Update Timer is the rate at which the AP (if using WPA-PSK key

management) or RADIUS server (if using WPA key management) sends a new

group key out to all clients. The re-keying process is the WPA equivalent of

automatically changing the WEP key for an AP and all stations in a WLAN on a

periodic basis. Setting of the Group Key Update Timer is also supported in WPA-

PSK mode. The ZyAIR default is 1800 seconds (30 minutes).

Apply Click Apply to save your changes back to the ZyAIR.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 287 288

Pas de commentaire

ZyXEL Communications G-3000 Guide de l'utilisateur Page 87