ZyXEL Communications G-102 - V1.0 Guide de l'utilisateur télécharger pdf (Page 224)

Chapter 64 Trunk Commands

Ethernet Switch CLI Reference Guide

224

64.2 Command Examples

This example activates trunk 1 and places ports 5-8 in the trunk using static link aggregation.

This example disables trunk one (T1) and removes ports 1, 3, 4, and 5 from trunk two (T2).

This example looks at the current trunks.

The following table describes the labels in this screen.

Table 134 lacp Command Summary

COMMAND DESCRIPTION M P

show lacp Displays LACP (Link Aggregation Control Protocol) settings. E 3

lacp Enables Link Aggregation Control Protocol (LACP). C 13

no lacp Disables the link aggregation control protocol (dynamic

trunking) on the Switch.

C13

lacp system-priority <1-65535> Sets the priority of an active port using LACP. C 13

sysname(config)# trunk t1

sysname(config)# trunk t1 interface 5-8

sysname(config)# no trunk T1

sysname(config)# no trunk T3 lacp

sysname(config)# no trunk T2 interface 1,3-5

sysname# show trunk

Group ID 1: inactive

Status: -

Member number: 0

Group ID 2: inactive

Status: -

Member number: 0

Group ID 3: inactive

Status: -

Member number: 0

Table 135 show trunk

LABEL DESCRIPTION

Group ID This field displays the trunk ID number and the current status.

inactive: This trunk is disabled.

active: This trunk is enabled.

Status This field displays how the ports were added to the trunk.

-: The trunk is disabled.

Static: The ports are static members of the trunk.

LACP: The ports joined the trunk via LACP.

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 285 286

Pas de commentaire

ZyXEL Communications G-102 - V1.0 Guide de l'utilisateur Page 224