ZyXEL Communications 10 Manuel d'utilisateur télécharger pdf (Page 9)

ZyWALL SSL 10 Support Notes

Step3. Check if UTM functions (ex. Firewall, Anti-Virus, and IDP) are enabled and without

blocking the SSL traffic from WAN to DMZ.

Step4. Setup the port forwarding for SSL traffic.

1) Go to the GUI > ADVANCED > NAT > Port Forwarding, add one rule to forward port

443 traffic to the ZyWALL SSL 10 (192.168.3.2)

Step5. Go to the GUI > ADVANCED > REMOTE MGMT > WWW, change the ZyWALL

UTM’s HTTPS management port number from port 443 to another port number(ex. 10443).

This is to make sure all HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10.

But if IT staff needs to access the ZyWALL UTM by HTTPS, they can use

https://IP_address:10443

(which the IP_address could be the ZyWALL’s LAN or DMZ or

WAN IP address depending on your remote management setting).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 101 102

Pas de commentaire

ZyXEL Communications 10 Manuel d'utilisateur Page 9