ZyXEL Communications 10 Manuel d'utilisateur télécharger pdf (Page 74)

ZyWALL SSL 10 Support Notes

3) Configure the destination NAT setting as follow. Click OK button.

Step4. Go to menu Configuration > Admin > Management, change the HTTPS Port for

management from port 443 to another port number(ex. 10443). This is to make sure all

HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10. But if IT staff needs to

access the Netscreen by HTTPS, they still can use https://IP_address:10443

(which the

IP_address might be Netcreen’s LAN or WAN IP address depending on your management

setting). Apply the setting then.

Step5. Access https://172.120.1.10

from an Internet PC’s IE browser. The ZyWALL

SSL10’s login page will be displayed for your login.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 101 102

Pas de commentaire

ZyXEL Communications 10 Manuel d'utilisateur Page 74