Zyxel-communications P-660HW-T v2 Manuel d'utilisateur Page 131

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 351
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 130
P-660HW-T v2 User’s Guide
Chapter 8 Network Address Translation (NAT) Screens 131
8.4.3 Configuring Servers Behind Port Forwarding (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), port 80 to another (B in the example) and assign a default server IP address of
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
Figure 73 Multiple Servers Behind NAT Example
8.5 Configuring Port Forwarding
Note: The Port Forwarding screen is available only when you select SUA Only in
the NAT > General screen.
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See Table 43 on page 130 for port numbers commonly used for particular services.
Figure 74 NAT Port Forwarding
Vue de la page 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 350 351

Commentaires sur ces manuels

Pas de commentaire