Zyxel-communications Internet Security Gateway 10~100 Series Manuel d'utilisateur télécharger pdf (Page 59)

ZyWALL 10~100 Series Internet Security Gateway

Firewall Commands 10-1

Chapter 10

Firewall Commands

The following describes the firewall commands. See the Command Interpreter appendix for information on

the command structure.

Chart 10-1 Firewall Commands

FUNCTION COMMAND DESCRIPTION

config edit firewall active

This command turns the firewall on or off.

config retrieve firewall

This command returns the previously saved

firewall settings.

config save firewall

This command saves the current firewall

settings.

config display firewall

This command shows the of all the firewall

settings including e-mail, attack, and the sets/

rules.

config display firewall set

<set #>

This command shows the current

configuration of a set; including timeout

values, name, default-permit, and etc.

If you don’t put use a number (#) after “set”,

information about all of the sets/rules appears.

config display firewall set

This command shows the current entries of a

rule in a firewall rule set.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 95 96

Pas de commentaire

Zyxel-communications Internet Security Gateway 10~100 Series Manuel d'utilisateur Page 59