Zyxel-communications Internet Security Gateway 10~100 Series Manuel d'utilisateur télécharger pdf (Page 27)

ZyWALL 10~100 Series Internet Security Gateway

Setting Up Your Computer’s IP Address 1-11

Click Network in the icon bar.

- Select Automatic from the Location list.

- Select Built-in Ethernet from the Show list.

- Click the TCP/IP tab.

For dynamically assigned settings, select Using DHCP from the Configure list.

4. For statically assigned settings, do the following:

-From the Configure box, select Manually.

-Type your IP address in the IP Address box.

-Type your subnet mask in the Subnet mask box.

-Type the IP address of your ZyWALL in the Router address box.

Click Apply Now and close the window.

6. Turn on your ZyWALL and restart your computer (if prompted).

Verifying Your Computer’s IP Address

Check your TCP/IP properties in the Network window.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

Pas de commentaire

Zyxel-communications Internet Security Gateway 10~100 Series Manuel d'utilisateur Page 27