Zyxel-communications 5 Series Manuel d'utilisateur télécharger pdf (Page 255)

ZyWALL 5/35/70 Series User’s Guide

Chapter 13 Configuring IDP 255

Configuring IDP

This chapter shows you how to configure IDP on the ZyWALL.

13.1 Overview

To use IDP on the ZyWALL, you need to insert the ZyWALL Turbo Card into the rear panel

slot of the ZyWALL. See the ZyWALL Turbo Card guide for details.

Note: Turn the ZyWALL off before you install or remove the ZyWALL Turbo card.

Note: The ZyWALL Turbo Card does not have a MAC address.

13.1.1 Interfaces

The ZyWALL checks traffic going in the direction(s) you specify for signature matches.

If a packet matches a signature, the action specified by the signature is taken. You can change

the default signature actions in the Signatures screen. In the following figure the ZyWALL is

set to check traffic coming from either WAN port to the LAN.

Figure 131 Applying IDP to Interfaces

Pas de commentaire

Zyxel-communications 5 Series Manuel d'utilisateur Page 255