Zyxel-communications 5 Series Manuel d'utilisateur télécharger pdf (Page 182)

100

101

ZyWALL 5/35/70 Series User’s Guide

182 Chapter 9 DMZ Screens

9.3 DMZ Static DHCP

This table allows you to assign IP addresses on the DMZ to specific individual computers

based on their MAC Addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address

is assigned at the factory and consists of six pairs of hexadecimal characters, for example,

00:A0:C5:00:00:02.

To change your ZyWALL’s static DHCP settings on the DMZ, click NETWORK > DMZ >

Static DHCP. The screen appears as shown.

Allow between DMZ

and WAN 2

Select this check box to forward NetBIOS packets from the DMZ to WAN port 2

and from WAN port 2 to the DMZ.

Clear this check box to block all NetBIOS packets going from the DMZ to WAN

port 2 and from WAN port 2 to the DMZ.

Allow between DMZ

and WLAN

Select this check box to forward NetBIOS packets from the WLAN to the DMZ

and from the DMZ to the WLAN. If your firewall is enabled with the default policy

set to block DMZ to WLAN traffic and WLAN to DMZ traffic, you also need to

configure DMZ to WLAN and WLAN to DMZ firewall rules that forward NetBIOS

traffic.

Clear this check box to block all NetBIOS packets going from the WLAN to the

DMZ and from the DMZ to the WLAN.

Apply Click Apply to save your changes back to the ZyWALL.

Reset Click Reset to begin configuring this screen afresh.

Table 46 NETWORK > DMZ (continued)

LABEL DESCRIPTION

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 834 835

Commentaires sur ces manuels

Pas de commentaire

Zyxel-communications 5 Series Manuel d'utilisateur Page 182

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Zyxel-communications 5 Series