ZyXEL Communications P-660 series Guide de l'utilisateur télécharger pdf (Page 167)

Chapter 13 Remote Management Configuration

P-660R-F1 Series User’s Guide

167

13.3 Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next. The administrator

uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 99 Telnet Configuration on a TCP/IP Network

13.4 Configuring Telnet

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.

Figure 100 Remote Management: Telnet

The following table describes the labels in this screen.

Table 62 Remote Management: Telnet

LABEL DESCRIPTION

Port You may change the server port number for a service if needed, however you

must use the same port number in order to use that service for remote

management.

Access Status Select the interface(s) through which a computer may access the ZyXEL Device

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify

to access the ZyXEL Device using this service.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 267 268

Pas de commentaire

ZyXEL Communications P-660 series Guide de l'utilisateur Page 167