Zyxel-communications NWA-3160 Series Manuel d'utilisateur télécharger pdf (Page 179)

Chapter 15 Log Screens

ZyXEL NWA-3160 Series User’s Guide

179

15.4 Log Commands

Go to the command interpreter interface (the Command Interpreter appendix explains how to access and

use the commands).

15.4.1 Configuring What You Want the ZyXEL Device to Log

Use the sys logs load command to load the log setting buffer that allows you to configure which logs

the ZyXEL Device is to record.

Use sys logs category followed by a log category and a parameter to decide what to record

Use the sys logs save command to store the settings in the ZyXEL Device (you must do this in order

to record logs).

8 Echo

0 Echo message

11 Time Exceeded

0 Time to live exceeded in transit

1 Fragment reassembly time exceeded

12 Parameter Problem

0 Pointer indicates the error

13 Timestamp

0 Timestamp request message

14 Timestamp Reply

0 Timestamp reply message

15 Information Request

0 Information request message

16 Information Reply

0 Information reply message

Table 68 Sys log

LOG MESSAGE DESCRIPTION

Mon dd hr:mm:ss hostname

src="<srcIP:srcPort>"

dst="<dstIP:dstPort>"

msg="<msg>" note="<note>"

This message is sent by the "RAS" when this syslog is

generated. The messages and notes are defined in this

appendix’s other charts.

Table 67 ICMP Notes (continued)

TYPE CODE DESCRIPTION

Table 69 Log Categories and Available Settings

LOG CATEGORIES AVAILABLE PARAMETERS

error 0, 1, 2, 3

mten 0, 1

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only

alerts for that category, and

3 to record both logs and alerts for that category.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 319 320

Commentaires sur ces manuels

Pas de commentaire

Zyxel-communications NWA-3160 Series Manuel d'utilisateur Page 179

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Zyxel-communications NWA-3160 Series