Zyxel-communications NWA-3160 Series Manuel d'utilisateur télécharger pdf (Page 142)

Chapter 12 Remote Management Screens

ZyXEL NWA-3160 Series User’s Guide

142

12.2 Configuring Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next. The

administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 85 Telnet Configuration on a TCP/IP Network

Click REMOTE MGNT tab to display the TELNET screen as shown.

Figure 86 Remote Management: Telnet

The following table describes the labels in this screen.

Table 48 Remote Management: Telnet

LABEL

DESCRIPTION

TELNET

Server Port You can change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Server

Access

Select the interface(s) through which a computer may access the ZyXEL Device

using Telnet.

Secured

Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the ZyXEL Device using this service.

SSH

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 319 320

Pas de commentaire

Zyxel-communications NWA-3160 Series Manuel d'utilisateur Page 142