ZyXEL Communications ZyAIR Guide de l'utilisateur télécharger pdf (Page 155)

ZyAIR B-3000 User’s Guide

Chapter 18 Firmware and Configuration File Maintenance 154

Figure 107 Menu 24.7.1 as seen using the Console Port

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload system firmware:

1. Enter "y" at the prompt below to go into debug mode.

2. Enter "atur" after "Enter Debug Mode" message.

3. Wait for "Starting XMODEM upload" message before activating

Xmodem upload on your terminal.

4. After successful firmware upload, enter "atgo" to restart the

router.

Warning: Proceeding with the upload will erase the current system

firmware.

Do You Wish To Proceed:(Y/N)

After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your

computer. Follow the procedure as shown previously for the HyperTerminal program. The

procedure for other serial communications programs should be similar.

18.4.8 Example Xmodem Firmware Upload Using HyperTerminal

Click Transfer, then Send File to display the following screen.

Figure 108 Example Xmodem Upload

Type the firmware

file’s location, or

click Browse to

look for it.

Choose the Xmodem

protocol.

Then click Send.

After the firmware upload process has completed, the ZyAIR will automatically restart.

18.4.9 Uploading Configuration File Via Console Port

Note: The console port is internal and reserved for technician use only.

1 Select 2 from Menu 24.7 – System Maintenance – Upload Firmware to display Menu

24.7.2 – System Maintenance – Upload System Configuration File. Follow the

instructions as shown in the next screen.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 220 221

Pas de commentaire

ZyXEL Communications ZyAIR Guide de l'utilisateur Page 155