ZyXEL Communications WLAN PCI Card IEEE802.11b Manuel d'utilisateur télécharger pdf (Page 31)

WLAN PCI Card User’s Manual

configurations in different profiles for different working environments. The default

profile will contain the initial configuration setting when you install the Card. Under

the Operating Mode drop-box, you may choose either Infrastructure or Ad-Hoc.

The Infrastructure mode allows a wireless adapter to communicate with a wired

network employing an Access Point, while the Ad-Hoc mode allows

wireless-to-wireless, peer-to-peer communication. If you choose Infrastructure, the

SSID should have the same name as the Access Point. If you choose Ad-Hoc, all

clients should share the same SSID name. You may also select which Transfer

Rate you wish to use: 1, 2, 5.5, 11Mbps or Auto Rate. Under Power Saving

Mode, you can select Enabled to allow your adapter to go to sleep mode while the

Card doesn’t proceed the data transmission. Or select Disabled to make the Card

never go to sleep mode. Click Apply to save the settings.

3. Select the “Site Survey” tab. The list on the adjacent screen shows you available

Access Points and their features. Click on the desired Access Point, then click

Connect to connect or Search to search for more Access Points. Click OK when

you are finished.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Pas de commentaire

ZyXEL Communications WLAN PCI Card IEEE802.11b Manuel d'utilisateur Page 31