ZyXEL Communications SMG-700 Guide de l'utilisateur télécharger pdf (Page 95)

Appendix C Setting up Your Computer’s IP Address

P-974H/HW Series User’s Guide

6 Click the Activate button to apply the changes. The following screen displays.

Click Yes to save the changes in all screens.

Figure 42 Red Hat 9.0: KDE: Network Configuration: Activate

7 After the network card restart process is complete, make sure the Status is

Active in the Network Configuration screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your

computer IP address.

1 Assuming that you have only one network card on the computer, locate the

ifconfig-eth0 configuration file (where eth0 is the name of the Ethernet card).

Open the configuration file with any plain text editor.

• If you have a dynamic IP address, enter dhcp in the BOOTPROTO= field. The

following figure shows an example.

Figure 43 Red Hat 9.0: Dynamic IP Address Setting in ifconfig-eth0

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=dhcp

USERCTL=no

PEERDNS=yes

TYPE=Ethernet

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 115 116

Pas de commentaire

ZyXEL Communications SMG-700 Guide de l'utilisateur Page 95