ZyXEL Communications NetAtlas Workgroup Guide de l'utilisateur télécharger pdf (Page 140)

Chapter 13 System Configuration

NetAtlas Workgroup User’s Guide

140

Figure 98 System Configuration: IP Setup

The following table describes the labels in this screen.

Table 62 System Configuration: IP Setup

LABEL DESCRIPTION

IP Setup

Domain Name

Server

DNS (Domain Name System) is for mapping a domain name to its corresponding IP

address and vice versa. Enter a domain name server IP address in order to be able to

use a domain name instead of an IP address.

Default

Management

Specify which traffic flow (In-Band or Out-of-band) the switch is to send packets

originating from itself (such as SNMP traps) or packets with unknown source.

Select Out-of-band to have the switch send the packets to the management port

labelled MGMT. This means that device(s) connected to the other port(s) do not

receive these packets.

Select In-Band to have the switch send the packets to all ports except the

management port (labelled MGMT) to which connected device(s) do not receive

these packets.

In-band Management IP Address

Use these fields to set the settings for the in-band management port.

DHCP Client Select this option to have the switch automatically obtain an IP address from a DHCP

server.

Static IP

Address

Select this option to specify a fixed IP address for the switch and configure the fields

below.

IP Address Enter the in-band management IP address of your switch in dotted decimal notation.

For example, 192.168.0.1.

IP Subnet

Mask

Enter the IP subnet mask of your switch in dotted decimal notation for example

255.255.255.0.

Default

Gateway

Enter the IP address of the default outgoing gateway in dotted decimal notation, for

example 192.168.0.254

VID Enter the VLAN ID to which this IP address belongs.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 241 242

Pas de commentaire

ZyXEL Communications NetAtlas Workgroup Guide de l'utilisateur Page 140