ZyXEL Communications P-2024 Guide de l'utilisateur télécharger pdf (Page 15)

P-2024 Support Notes

Configuration:

1. Active: Select this check box to enable syslog logging.

2. Syslog IP Address: Enter the IP address of the syslog server that you wish to send the syslog.

3. Log Facility: Select a log location (numbered 1 to 7).

• UNIX Setup

1. Make sure that you start syslogd with the

-r

argument.

-r

allows the syslog facility to receive messages from the network using an Internet domain socket with the

syslog services. The default setting is NOT enabled.

2.Add the following commands at the end of the /etc/syslog.conf file.

local1.* /var/log/zyxel.log

Where /var/log/zyxel.log is the full path of the log file.

3. Restart syslogd.

• CDR log(call messages)

Format:

sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );

String = board xx line xx channel xx, call xx, str

board = the hardware board ID

line = the WAN ID in a board

channel = channel ID within the WAN

call = the call reference number which starts from 1 and increments by 1 for each new call

str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)

C01 Incoming Call xxxxBps xxxxx (L2TP,xxxxx is the Remote Call ID)

C01 Incoming Call xxxx (the connected speed) xxxxx (the Remote Call ID)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Pas de commentaire

ZyXEL Communications P-2024 Guide de l'utilisateur Page 15