ZyXEL Communications PLA-4xx Guide de l'utilisateur télécharger pdf (Page 25)

Chapter 3 Managing Your PLA-400/402

PLA-400/402 Series User’s Guide

" Use the icon to view online help information in each screen of the utility.

Figure 14 Configuration Screen

The following table describes the labels in this screen.

Table 2 Configuration Screen

LABEL DESCRIPTION

Network

Topology

Use this to select which power line network information is displayed. Different power

line networks are identified by the Ethernet interface (network card) connected

directly to the PLA-400/402. Typically there is only one connection, however, if your

computer has two network cards and both are connected to a PLA-400/402 then you

have two power line networks.

The fields described below are used to identify the PLA-400/402s and other power line adapters

recognized on the power line network. The configuration utility automatically updates this information

every 10 seconds. Click Scan to refresh the information in these fields (immediately).

Note: Only devices which share the same network password are displayed in

this table.

Site This field displays

• Local, if it is identifying the PLA-400/402 directly connected to the computer

running the configuration utility.

• Remote, if it is a power line adapter in your power line network but not directly

connected to the computer running the configuration utility.

MAC Address This is a read-only field which shows the MAC address of the power line adapter you

are configuring. You can find the MAC address of your PLA-400/402 displayed on a

sticker on the bottom of your device.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Pas de commentaire

ZyXEL Communications PLA-4xx Guide de l'utilisateur Page 25