ZyXEL Communications G-5100 Guide de l'utilisateur télécharger pdf (Page 8)

ZyAIR G-5100

6 After initial configuration, use a straight-through Ethernet cable to connect the power injector’s DATA IN

port to a switch or router.

5 Hardware Installation

5.1 Antenna Connections

Do the following to connect the antennas.

4 Click OK. 5 Click Yes to close the web configurator.

Click No to use the ADVANCED screens to

configure other features.

The ZyAIR is equipped with standard-N

type (female) jacks for connecting to the

included standard-N type (male) plug

2.4GHz wireless antennas (or cable).

Note: The gender of the connectors is

determined by the center pin,

NOT by the connectors’s

threads.

A hollow pin is female, a solid

pin is male.

1 Remove the backing from

both sides of the

waterproofing strip.

2 Stretch the waterproofing

strip.

Standard-N Female Jack

Standard-N Male Plug

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

ZyXEL Communications G-5100 Guide de l'utilisateur Page 8