ZyXEL Communications G-102 Guide de l'utilisateur Page 71

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 198
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 70
ZyXEL G-1000 v2 User’s Guide
Chapter 6 Remote Management Configuration 71
Figure 27 Remote Management: FTP
The following table describes the labels in this screen.
6.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your G-1000 v2 supports SNMP agent functionality, which allows a manager
station to manage and monitor the G-1000 v2 through the network. The G-1000 v2 supports
SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an
SNMP management operation.
Note: SNMP is only available if TCP/IP is configured.
Table 27 Remote Management: FTP
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the G-1000 v2 using
this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the G-
1000 v2 using this service.
Select All to allow any computer to access the G-1000 v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the G-1000 v2 using this service.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.
Vue de la page 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 197 198

Commentaires sur ces manuels

Pas de commentaire