ZyXEL Communications VSG1432 Guide de l'utilisateur Page 83

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 408
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 82
Chapter 6 Broadband
VSG1432-B101 Series User’s Guide
83
6.2.2.1 Bridge
This screen displays when you select the Bridge mode.
Figure 21 Broadband: Add/Edit: Bridge Mode
DNS Select Dynamic if you want the ZyXEL Device use the DNS server
addresses assigned by your ISP.
Select Static if you want the ZyXEL Device use the DNS server
addresses you configure manually.
DNS Server 1 Enter the first DNS server address assigned by the ISP.
DNS Server 2 Enter the second DNS server address assigned by the ISP.
VLAN (These fields appear when the Type is set to VDSL or Ethernet)
Active Select this option to add the VLAN tag (specified below) to the outgoing
traffic through this connection.
802.1P IEEE 802.1p defines up to 8 separate traffic types by inserting a tag
into a MAC-layer frame that contains bits to define class of service.
Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic
through this connection. The greater the number, the higher the
priority level.
802.1Q Type the VLAN ID number (from 1 to 4094) for traffic through this
connection.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to exit this screen without saving.
Table 7 Broadband: Add/Edit: Routing Mode
LABEL DESCRIPTION
Vue de la page 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 407 408

Commentaires sur ces manuels

Pas de commentaire