ZyXEL Communications STB-1001S Guide de l'utilisateur télécharger pdf (Page 24)

Chapter 1 Introducing the STB

STB-1001S User’s Guide

1.2 LEDs

This section describes the LEDs (lights) on the front of the STB.

Figure 2 LEDs

1.3 Rear Panel Connections

This section describes the rear of the STB.

Table 1 LEDs

LED STATUS DESCRIPTION

POWER On Red The STB is starting up, or is in standby mode.

Green The STB is on and ready to use.

Off The STB is not receiving power, or has malfunctioned.

LAN On Green The STB has an Ethernet connection to the network on

the LAN port.

Blinking Green The STB has an Ethernet connection to the network on

the LAN port, and is transmitting or receiving data.

Off The STB has no network connection on the LAN port.

REMOTE Blinking Green The Infra-red receiver on the front of the STB is

receiving signals from the remote control.

Off The Infra-red receiver on the front of the STB is not

receiving signals from the remote control.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 136 137

Pas de commentaire

ZyXEL Communications STB-1001S Guide de l'utilisateur Page 24