ZyXEL Communications P-335WT Guide de l'utilisateur télécharger pdf (Page 14)

P-335WT

No configuration changes will be saved to the Prestige until you click Finish.

1. Click Wizard Setup in the main menu to display the first wizard screen.

System Name is a unique name to

identify the Prestige in an Ethernet

network. Enter a descriptive name.

The Domain Name entry is what is

propagated to the DHCP clients on the

LAN. If you leave this blank, the

domain name obtained by DHCP from

the ISP is used.

Click Next to continue.

Set up your wireless LAN using the following screen.

Name(SSID) is a unique name to

identify the Prestige in the wireless

LAN. Enter a descriptive name.

The range of radio frequencies used by

IEEE 802.11b/g wireless devices is

called a channel.

Select a channel ID that is not already

in use by a neighboring device.

Select Auto, None, Basic(WEP) or Extend(WPA-PSK) from the drop-down list box as the level of wireless security.

Choose Auto to use WPA-PSK security with a default Pre-Shared Key and proceed to another wireless LAN setup screen

where you can enable OTIST. Choose this option only if your wireless clients support WPA-PSK.

Choose None to have no wireless LAN security configured. If you do not enable any wireless security on your Prestige,

your network is accessible to any wireless networking device that is within range.

Choose Basic(WEP) security if you want to configure WEP Encryption parameters.

Choose Extend(WPA-PSK) security to configure a Pre-Shared Key. Choose this option only if your wireless clients

support WPA-PSK.

The next screen varies depending on which security level you select.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 120 121

Pas de commentaire

ZyXEL Communications P-335WT Guide de l'utilisateur Page 14