
ZyAIR Wireless LAN Utility
3-12 Using the ZyAIR Utility
Table 3-7 ZyAIR Utility: Configuration
FIELD DESCRIPTION
Service Set
Identifier (SSID)
Enter the SSID of the AP or the peer ad-hoc computer to which you want to associate in
this field. To associate to an ad-hoc network, you must enter the same SSID as the peer
ad-hoc computer.
Enter Any to associate to or roam between any infrastructure wireless networks. This is
the default setting.
Transfer Rate
Select a transmission speed from the drop-down list box. Choose from Fully Auto
(default), 1M bit/sec, 2M bit/sec, 5.5M bit/sec, 11M bit/sec, 16.5M bit/sec and 27.5M
bit/sec
3
.
For ZyAIR B-122 and ZyAIR B-320, the proprietary transmission rates of 16.5M bit/sec
and 27.5M bit/sec are available from the drop-down list. Select an option if you are
connected to another ZyAIR B-122, ZyAIR B-320 clients or ZyAIR B-500 and vice versa
4
.
Channel Select the channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer ad-hoc computer.
Power Saving
Mode
Select Enable from the drop-down list menu to save power (especially for laptop
computers). This forces the ZyAIR to go to sleep mode when it is not transmitting data.
When you select Disable, the ZyAIR will never go to sleep mode.
Restore Default
Click Restore Default to reset all fields back to factory default values.
Undo Changes
Click Undo Changes to start configuring the fields again.
Apply Changes
Click Apply Changes to save the changes back to ZyAIR.
3.9 Network Configuration Profile Setting
The Profile in the Configuration screen allows you to save the wireless network settings in the
Configuration screen, use one of the pre-configured network profiles or reset the settings in the
Configuration screen to the factory default values.
3
Not available at the time of writing.
4
At the time of writing, the proprietary transmission rates are only available for ZyAIR B-122, ZyAIR B-
320 and ZyAIR B-500.
Commentaires sur ces manuels