ZyXEL Communications M-202 Guide de l'utilisateur télécharger pdf (Page 47)

ZyXEL M-202 User’s Guide

Chapter 3 ZyXEL Utility Configuration 47

3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,

WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data

encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP

encryption method. Otherwise, select DISABLE to allow the ZyXEL M-202 to

communicate with the access points or other peer wireless computers without any data

encryption and skip to step 5.

Figure 24 Profile: Security Setting: Encryption Type

4 The screen varies depending on the encryption method you select in the previous screen.

The settings must be exactly the same on the APs or other peer wireless computers as

they are on the ZyXEL M-202. Refer to Section 3.2.2 on page 38 for detailed information

on wireless security configuration.

Figure 25 Profile: Security Setting

5 This read-only screen shows a summary of the new profile settings. Verify that the

settings are correct. Click Save to save and go to the next screen. Click Back to return to

the previous screen. Otherwise, click Exit to go back to the Profile screen without saving.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 80 81

Pas de commentaire

ZyXEL Communications M-202 Guide de l'utilisateur Page 47