Zyxel-communications P-871M Manuel d'utilisateur télécharger pdf (Page 4)

P-871M User’s Guide

5 Use the included power adaptor to connect the POWER

socket to a proper power source.

6 Push the power switch to the on position.

1.2 CPE Mode

1 Set the CO/CPE switch on the rear panel to the CPE side.

2 Use the included console cable to connect the CONSOLE

port to your computer’s COM port for configuration.

3 Use the included yellow Ethernet cable to connect the

ETHERNET port to your network device, such as a switch.

4 Over ISDN: Use the included gray cable with a RJ-45

connector to connect the DSL port to another P-871M in

CO mode.

Over POTS: Use the included gray cable with a RJ-11

connector to connect the DSL port to another P-871M in

CO mode.

5 Use the included power adaptor to connect the POWER

socket to a proper power source.

CPE

1 2 3 4 5 6 7 8 9 ... 25 26

Pas de commentaire

Zyxel-communications P-871M Manuel d'utilisateur Page 4