Zyxel-communications Network Storage NSA-220 Plus Manuel d'utilisateur télécharger pdf (Page 10)

3. Press the power button on the front of the NSA to turn it on. Look at

the front panel lights.

 If no lights turn on, make sure the power cord is not loose

and that the power source is turned on.

• The power button light turns steady blue.

• The SYS light turns steady green after a successful startup (it takes

about 50 seconds).

• The HDD lights come on if the NSA detects hard drives in the disk

bays.

• The rear panel LAN port has a light that turns on if the Ethernet port

is properly connected to your network. It blinks while sending or

receiving traffic.

To turn off the NSA, press the power button in and hold it until you

hear a beep. Then release the button.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 215 216

Pas de commentaire

Zyxel-communications Network Storage NSA-220 Plus Manuel d'utilisateur Page 10