Zyxel-communications U-336SA Manuel d'utilisateur télécharger pdf (Page 90)

76 Fax Operation

Command Value Description

document reception

+FDT Transmit phase C data command: releases

the DCE to proceed with negotiation

+FEA=n Phase C received EOL alignment

parameter

n=0 Determine that T.4 EOL patterns are bit

aligned (as received).

n=1 Determine that the last received bits of T.4

EOL patterns are byte aligned by the

DCE, with necessary zero fill bits inserted.

+FIE=n Procedure interrupt parameter

n=0 Procedure interrupt requests from the

remote station are ignored, and not

reported to the DTE.

n=1 Procedure interrupt requests from the

remote station are accepted, negotiated

and reported using the +FVO response.

+FIP Initialize facsimile parameters to factory

default.

+FIS=vr,br,wd,l

n,df,ec,bf,st

Current session parameter. refer to

+FDCC Class 2 command in previous

section parameter settings.

+FKS Session termination command.

+FLI="string" Local ID string parameter.

+FLO=n Flow control options:

n=0 No flow control.

n=1 Set XON/XOFF software flow control.

n=2 Set CTS/RTS hardware flow control.

+FLP=n Document for polling command:

n=0 The DTE has no document for polling.

n=1 Indicated document available for polling.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 160 161

Pas de commentaire

Zyxel-communications U-336SA Manuel d'utilisateur Page 90