Zyxel-communications PLA-470 Manuel d'utilisateur télécharger pdf (Page 42)

Chapter 4 The ENCRYPT Button

PLA-4xx Series User’s Guide

2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of

each other.

3 Wait for about one minute while (A) and (C) connect.

4 Check the LEDs on both (A) and (C). When the power ( ) and HomePlug ( ) lights

stop blinking and the power ( ) light shines steadily, the devices are connected.

Figure 22 Two Separate Powerline Networks

Congratulations. You now have two separate powerline networks as shown above.

V If the HomePlug ( ) lights on both powerline devices do not light up, the

powerline devices are not connected. Repeat the connection process, making

certain you press the ENCRYPT buttons for the correct time and within two

minutes of each other. If that does not work see Section 7.5 on page 74 for

suggestions.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Pas de commentaire

Zyxel-communications PLA-470 Manuel d'utilisateur Page 42