Zyxel-communications 70 Series Manuel d'utilisateur télécharger pdf (Page 175)

100

101

ZyWALL 5/35/70 Series User’s Guide

175 Chapter 9 Wireless LAN

Figure 70 WLAN

The following table describes the labels in this screen.

Table 49 WLAN

LABEL DESCRIPTION

WLAN TCP/IP

IP Address Type the IP address of your ZyWALL’s WLAN interface in dotted decimal notation.

Alternatively, click the right mouse button to copy and/or paste the IP address.

Note: Make sure the IP addresses of the LAN, WAN, WLAN and

DMZ are on separate subnets.

IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your

ZyWALL automatically calculates the subnet mask based on the IP address that

you assign. Unless you are implementing subnetting, use the subnet mask

computed by the ZyWALL.

RIP Direction RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to

exchange routing information with other routers. The RIP Direction field controls

the sending and receiving of RIP packets. Select the RIP direction from Both/In

Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast

its routing table periodically. When set to Both or In Only, it will incorporate the RIP

information that it receives; when set to None, it will not send any RIP packets and

will ignore any RIP packets received. Both is the default.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 806 807

Commentaires sur ces manuels

Pas de commentaire

Zyxel-communications 70 Series Manuel d'utilisateur Page 175

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Zyxel-communications 70 Series