Zyxel-communications 3G Wireless Router NBG410W3G Manuel d'utilisateur télécharger pdf (Page 5)

ENGLISH

Look at the LEDs (Lights)

•The POWER ( ) light blinks during start-up and stays green once the NBG41xW3G is

ready.

•The LAN ( ) and WAN ( ) lights turn on and stay on if the corresponding con-

nections are properly made.

•The WLAN ( ) light turns steady green when the built-in Wi-Fi feature is enabled.

•The 3G OPERATION () light turns on when a 3G connection is made and the 3G SIG-

NAL STRENGTH ( ) light indicates the signal strength. See the User’s Guide for more

information on these lights.

V Check your connections if the power () or LAN () light does not

turn on. If this doesn’t help, disconnect the NBG41xW3G from its power

source, wait for a few seconds and then reconnect the power.

2 Access the NBG41xW3G from Your Computer

Use the NBG41xW3G’s web configurator to configure settings on the NBG41xW3G.

1 Launch a web browser (such as Internet

Explorer). Enter the NBG41xW3G’s

default IP address, http://192.168.1.1,

and press [ENTER].

2 Click Login (the default password 1234

is already entered).

1 2 3 4 5 6 7 8 9 10 ... 87 88

Pas de commentaire

Zyxel-communications 3G Wireless Router NBG410W3G Manuel d'utilisateur Page 5