Zyxel-communications 128MH Manuel d'utilisateur télécharger pdf (Page 49)

Prestige 128MH PSTN Router/Hub

2-19

Chapter 2 Hardware Installation & Initial Setup

Refer to Table 2-6 for details on how to fill in the AT commands fields.

Table 2-6. Advanced WAN Port Setup AT Commands Fields

Field Description Default

AT Command Strings:

Dial

Drop

Answer

Enter the AT Command string to make a modem/ISDN TA

connection.

Enter the AT Command string to drop a modem/ISDN TA

connection. [~] represents a one second wait.

Enter the AT Command string to answer a phone call and make a

modem/ISDN TA connection.

[atd]

[~+++~ath]

[ata]

Drop DTR When Hang

When [Yes] is selected, your Prestige will drop the DTR signal

after sending out [AT Command String: Drop].

Toggle

[Yes/No]

(Default=[Yes])

AT Response Strings:

CLID (Caller Line

Identification)

Enter the keyword to capture Caller ID from the AT Response

String. Your Prestige will capture CLID from the AT Response

String, if they are available. The keyword just before CLID is

recognized first; then captures CLID. CLID is required for Prestige

callback function or CLID authentication. Not every modem

supports CLID.

[NMBR]

Called ID Enter the keyword to capture Called ID from AT Response String. [TO]

Speed Enter the keyword to capture the Connection Speed from AT

Response String.

[CONNECT]

When you have completed this menu, press [Enter] to return to Menu 2.1.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 177 178

Pas de commentaire

Zyxel-communications 128MH Manuel d'utilisateur Page 49