ZyXEL Communications EMG2926-Q10A Guide de l'utilisateur télécharger pdf (Page 51)

Chapter 6 Tutorials

EMG2926-Q10A User’s Guide

The instructions require that your hardware be connected (see the Quick Start Guide) and that you

be logged into the Web Configurator through your LAN connection (see Section 2.2 on page 17).

1 Make sure the WIFI switch (at the side panel of the EMG2926-Q10A) is set to ON.

2 Open the Configuration > Network > Wireless LAN 2.4G > General screen in the AP’s Web

Configurator.

3 Confirm that the wireless LAN is enabled on the EMG2926-Q10A.

4 Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to

WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click

Apply.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 164 165

Pas de commentaire

ZyXEL Communications EMG2926-Q10A Guide de l'utilisateur Page 51