ZyXEL Communications NWD-210N - FOR MAC V1.00 Guide de l'utilisateur télécharger pdf (Page 97)

Chapter 11 Wireless LAN

NBG6616 User’s Guide

11.4 More AP Screen

This screen allows you to enable and configure multiple wireless networks and guest wireless

network settings on the NBG6616.

You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the NBG6616.

This allows you to use one access point to provide several BSSs simultaneously. You can then

assign varying security types to different SSIDs. Wireless clients can use different SSIDs to

associate with the same access point.

Click Network > Wireless LAN 2.4G/5G > More AP. The following screen displays.

Pre-Authentication This field is available only when you select WPA2.

Pre-authentication enables fast roaming by allowing the wireless client (already

connecting to an AP) to perform IEEE 802.1x authentication with another AP before

connecting to it. Select Enable to turn on preauthentication in WAP2. Otherwise,

select Disable.

Authentication Server

IP Address Enter the IP address of the external authentication server in dotted decimal notation.

Port Number Enter the port number of the external authentication server.

You need not change this value unless your network administrator instructs you to do

so with additional information.

Shared Secret Enter a password (up to 127 alphanumeric characters) as the key to be shared

between the external authentication server and the NBG6616.

The key must be the same on the external authentication server and your NBG6616.

The key is not sent over the network.

Session Timeout The NBG6616 automatically disconnects a wireless client from the wireless and wired

networks after a period of inactivity. The wireless client needs to send the username

and password again before it can use the wireless and wired networks again. Some

wireless clients may prompt users for a username and password; other clients may

use saved login credentials. In either case, there is usually a short delay while the

wireless client logs in to the wireless network again.

Enter the time in seconds from 0 to 999999.

Apply Click Apply to save your changes back to the NBG6616.

Cancel Click Cancel to reload the previous configuration for this screen.

Table 34 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2 (continued)

LABEL DESCRIPTION

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 245 246

Pas de commentaire

ZyXEL Communications NWD-210N - FOR MAC V1.00 Guide de l'utilisateur Page 97