ZyXEL Communications NWD-370 - Guide de l'utilisateur télécharger pdf (Page 42)

ZyXEL NWD-370N User’s Guide

42 Chapter 4 Wireless Configuration

4.3.1.4 IEEE 802.1x

Configure IEEE 802.1x security with various authentication methods in this screen.

Figure 25 Security Setting: 802.1x

Password This field is not available when you select TLS in the Authentication Type field.

Enter the password associated with the user name above.

Certificate This field is only available when you select TLS in the Authentication Type field.

Click Browse to select a certificate.

Note: You must first have a wired connection to a network and

obtain the certificate(s) from a certificate authority (CA).

Consult your network administrator for more information.

Server CA Select a certificate authority (CA) that you trust and accept any certificates signed

by the CA.

Otherwise, select Trust Any to accept certificates from any CA.

PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type

field.

The PEAP method used by the RADIUS server or AP for client authentication is

MS CHAP v2.

Back Click Back to go to the Site Survey screen to select and connect to another

network.

Next Click Next to confirm your selections and advance to the Confirm Save screen.

Refer to Section 4.3.2 on page 43.

Exit Click Exit to return to the Site Survey screen without saving.

Table 10 Security Setting: WPA/WPA2

LABEL DESCRIPTION

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Pas de commentaire

ZyXEL Communications NWD-370 - Guide de l'utilisateur Page 42